Produkt Neuheiten

  • HOME >
  • Produkt Neuheiten

Conductive Polymer Aluminum Electrolytic Capacitor (Hybrid Type) 150ºC, High Ripple Current PLV siries

1. Introduction

 We add surface-mount type "PLV" Series (1000h at 150ºC) to winding type conductive polymer aluminum electrolytic capacitor (hybrid type), while we have already launched various series of hi-voltage and high capacitance hybrid type capacitor such as surface-mount type "PEV" (10000h at 105ºC), "PFV" (4000h at 125ºC), "PHV" (4000h at 135ºC) and "PJV" (4000h at 125ºC, Miniaturized). Our hybrid products have contributed to miniaturization and long life of automotive equipment where high reliability is required.
 Conductive polymer aluminum solid electrolytic capacitor (hybrid type) uses conductive polymer and unique functional liquid in combination so that it has much lower ESR and higher compatibility with ripple current than conventional non-solid aluminum electrolytic capacitor. In addition, it has excellent features that the frequency characteristics are stable up to the extremely low temperature range and ESR change with time at high temperature use is very small.
 In recent years, capacitors are required to have higher heat resistance due to the mounting of in-vehicle electrical components in the engine room and electromechanical integration. Therefore, we newly developed PLV series guaranteed at 150ºC for 1000 hours, which further improved the heat resistance of the hybrid type surface mount product PHV series guaranteed at 135ºC.

2. Features

 PLV series has achieved maximum working temperature of 150ºC while maintaining excellent characteristics of hybrid type and also achieved highest rated ripple current in 150ºC category by adopting new heat resistant materials and improved manufacturing method. In addition, it has moisture resistanceof 85 ºC 85% RH 2000hr.
 The capacitance per unit volume is about 1.2 to 2.4 times and the rated ripple current is about 7 to 11 times in comparison with our conventional 150ºC guaranteed automotive use aluminum electrolytic capacitor RX50 series (lead terminal type). PLV series can contribute greatly to downsizing in-vehicle equipment.

Major Specifications
Category temperature range-55ºC~+150ºC
Rated voltage25V~35V
Capacitance100µF~270µF
SizeΦ8×10.5~Φ10×10.5
Lifetime150ºC1000 hours
Humidity resistance85ºC85%RH 2000 hours

Specification comparison
Volt.Cap.PLV sereisRX50 sereis
SizeRipple CurrentSizeRipple Current
35V100µF
8×10.51400mA10×16370mA
Volume
約530mm³
Ripple/Volume
約2.65mA/mm³
Volume
約1260mm³
Ripple/Volume
約0.29mA/mm³

PLV

3. Schedules of sample distribution and mass production

Sample Distribution :available
Mass Production :January, 2019

PLV Series Catalog data

Page top

1938-1, Nishi-Minowa Ina City, Nagano 399-4593 Japan TEL:0265-72-7111 FAX:0265-73-2914